Recent content by GMC guy

  1. G

    Mustang engine swap

    All fixed and running like a charm. Clutch good. No problems.
  2. G

    Ford diesel Rough idle

    Okay i will test the injectors when i have time. Thank you!
  3. G

    Ford diesel Rough idle

    1999 ford F 450 superduty. 7.3 powerstroke diesel auto. 248k turbo. Engine runs rough. Does not have much power. I dont drive too many diesels so im not sure how to tune this truck up. Need a bit of help. Thank you in advance
  4. G

    Mustang engine swap

    Well, my sister was impatient and said she was stressed out when i mentioned new parts. So i put all old parts back in it to get it done. Shes happy as a pig in &$%#. Until the clutch goes....!
  5. G

    Mustang engine swap

    Hey i didnt have shifting earlier. I pushed the hydraulic connector into the bell housing and it now shifts to all gears with engine running. And drives. Thank you all.
  6. G

    Mustang engine swap

    But you know, the tranny bolted together easily. If i had difficulty getting tranny shaft into flywheel and crank, i would have taken a look at it and corrected
  7. G

    Mustang engine swap

    The tranny will not shift. If i shut it off, i can shift gears. Or if i shut the car off, push clutch and change gear. Start up and let clutch out, car goes. But cannot change gears....o_O
  8. G

    Mustang engine swap

    Sorry Nickb2 and JD. Yes, 8 bolts. Thank you for the info. Very helpful. My main concern is the bushing. I was looking at youtube videos and some were saying automatics dont have the bushings so the torque can fit in the crank. And it sure looks like the old and replacement engine both have the...
  9. G

    Mustang engine swap

    Hey y’all. Got a 06 mustang with 4.0 standard tranny. Engine siezed. Putting another engine that had an automatic tranny on it. It had a smaller thinner flywheel and what looks like a spacer with the 7 flywheel holes. I am putting original clutch flywheel which has the pilot bearing in it. I...
  10. G

    Starter diagra

    Got po315, po513, p1631, p2078, u0109 codes
  11. G

    Starter diagra

    Yeah i changed the ecm, and fuel pump primes. I do have the other ecm if it has to go back in.
  12. G

    Starter diagra

    Flipped the ecm. Fuel pump now primes, but still no starter at key to start.
  13. G

    Starter diagra

    checked ems 1 and ems 2 fuses and they are both good fuses but no power to them. Ems 1 powers the dlc and fuel pump. But the dlc does have power To it...
  14. G

    Starter diagra

    There is no power at pin 86 when i turn to start. I still cannot get codes and there is power at pin 16. Fuses are good for dlc. Wiring is ok.
  15. G

    Starter diagra

    Yes, i shall check pin 16 when i get a chance. And there is no alarm on this car. No power windows or anything. Key doesnt even have lock unlock. Im Working my full time job til tuesday. Will post what i find, then