Search results

  1. K

    Low clutch pedal, Saturn

    what would happen if I hook up an A/C vacuum pump and pull 28 inches.
  2. K

    Low clutch pedal, Saturn

    There is not really a bleeder screw on these cars. I am thinking of vacuum bleeding if while jacking it up from different angles. There seems to be a small air pocket in the slave cylinder that just does not want to come out.
  3. K

    Low clutch pedal, Saturn

    Please fill out the following to ask a question. MAKE: Saturn MODEL: Ion YEAR: 2004 MILES: 140,000 ENGINE: 4 cyk DESCRIBE ISSUE.... I put the clutch in for a customer and replace the master and slave cylinders. On this model the brake master cylinder and clutch master cylinder share the...
  4. K

    foaming power steering fluid

    I don't thing wrong fluid is your problem.
  5. K

    bleeding the slave and master cylinder

    Thanks for all the help. The bleeder in the line was pretty much worthless. I had to pull vacuum on the master cylinder about 3 times to get all the air out. Used my smoke machine gas tank cone, worked great. So much vacuum I had to pump the brake to to push the piston back out on the...
  6. K

    bleeding the slave and master cylinder

    I see that nipple on the old one and the new one, but as far as I can tell it is not a bleed screw. As far as I can tell it is not threaded and is molded into the plastic line. This is what I am trying to find out. If you read alldata has no mention of a bleeder. And a assume the TSB is...
  7. K

    bleeding the slave and master cylinder

    Nick, thanks for all the comments. I watched the video. My question is on this saturn there is no bleeder screw.
  8. K

    bleeding the slave and master cylinder

    I have a nice hand held vacuum pump. And I was going to try to used my smoke tester gas tank cone in the master cylinder, because that is what the tool looked like to me. I have also done the ford rangers and f 150's where you try to jack up one end up the truck and all that, the difference is...
  9. K

    bleeding the slave and master cylinder

    MAKE: Saturn MODEL: Ion YEAR: 2004 MILES: 120,000 ENGINE: 2.2L DESCRIBE ISSUE.... I need to bleed the system. I read alldata and the TSB. I guess you just put a vacuum pump on the reservoir and it will such all the air out of the system after doing this a few times and refilling. Will this...
  10. K

    2000 Toyota Sienna low tire pressure light

    Should be simple, but I bought the car used and don't have the owners manual. Accually, I don't even know how I did it just keep pressing then holding.
  11. K

    2000 Toyota Sienna low tire pressure light

    I was messing with a reset switch, but I don't know how to do it. So I just keep pushing it but nothing happens. However, I was taking my wife to the store and while she was in the store I just kept messing with the button and holding it and eventually it flashed and reset, and relearned; I...
  12. K

    2000 Toyota Sienna low tire pressure light

    should have posted in imports, maybe someone at the tech department will move it, sorry
  13. K

    2000 Toyota Sienna low tire pressure light

    Please fill out the following to ask a question. MAKE: Toyota MODEL: Sienna YEAR: 2000 MILES: 162,000 ENGINE: v6 DESCRIBE ISSUE.... problem started with ABS coming on (only pump running) while driving and ABS engaging brake pedel every time you hit the brake. After a while ABS light...
  14. K

    Blown Head Gasket

    Did you diagnosis it before you took it apart? Why do you think the head gasket was blown. If when you pulled the heead water was pouring all over the floor it could have went into the middle cylinder so I am not sure it that tells you anything. Put a straight edge on the head and tell us if...
  15. K

    Ford F150 2012 VVT

    To anwser one of the question, the VVT solenoid is only covered under the 3 years 36,000 mile warranty. The phaser is covered under the 5 year 60,000 mile powertrain warranty. This is what I was told by ford I have no explaination for it. I should get the truck back from Ford tomorrow, So I...
  16. K

    Ford F150 2012 VVT

    Just got off the phone with the service manager and he agree that a bad solenoid could not cause the phaser to go bad and they are going to refund the money. Basically I argued that a stuck solenoid (stuck closed or opened) is within the normal operational range of the phaser therefore would...
  17. K

    Ford F150 2012 VVT

    I have a brand new snap on solus ultra and I posted the only code in the truck. Oil has been changed regularly. My question is still: Is they any reason to believe a bad VVT solenoid would ruin a cam phaser. I still think this is not possible. The solenoid is only a valve that moves the...
  18. K

    Ford F150 2012 VVT

    This is a 3.7L engine, with 55,000 miles. I took it to the dealer under the powertrain 60.000 mile warranty. I scanned the code before I took it in and it was the P0024 code. They said the VVT solinoid was bad and replace it. Said this was not covered under wattanty. So I had them fix it...
  19. K

    Ford F150 2012 VVT

    This truck had a code P0024 I think. The VVT solenoid was replaced then the code came back and I was told the phaser is now the problem. I was told a bad VVT solenoid will cause the phaser to go bad. To me this does not sound right. Also I was told you have to replace the solenoid with the...
  20. K

    2001 Mack CH613 A/C system

    Yes on the side of the radiator it says 3 lb of freon and 9 oz of oil which was what I put in it. I could take a few oz out and see how it performs. There is no blend door as far as I can tell only a coolant valve in line hooked to a cable and knob inside. I pulled a cover back and looked at...