Search results

  1. C

    New A6 Aluminum A/C Compressor

    I did the same, proper oil and freon and still had issues with the older A6. thanks
  2. C

    New A6 Aluminum A/C Compressor

    thank you there was a company in phoenix az that specialized in a/c called ackits.com that I just remembered. Maybe they can help. I myself had nothing but troubles with the gm version of the A6. I had one going down the road sieze up, fry the belt and make a mess of things. I see that the ac...
  3. C

    New A6 Aluminum A/C Compressor

    Has anyone used the new designed GM A6 compressor that is now revised and built with aluminum and can use either R12 or 134a? It's supposed to bolt in exactly like the original did same brackets no modifications.. thats the long heavy one GM used in many makes and models in the 1970-80's...
  4. C

    Whirring sound coming from the front end

    have you checked your tiresz?? tires can make a hell of a lot of noise expecially if one is going bad. just my 2 cents but i would rule the tires out for noise go get them roadforce balance meaning they can put a load the tires on the balance machine to check for bent rim, bad tire out of...
  5. C

    2010 Impala 3.5 4T65E?

    it looks like it can only fit one way with the bend facing up?
  6. C

    2010 Impala 3.5 4T65E?

    thats the one thank you
  7. C

    2010 Impala 3.5 4T65E?

    Please fill out the following to ask a question. MAKE:chev MODEL:Impala YEAR:2010 MILES:53000 ENGINE:3.5 DESCRIBE ISSUE....I believe my Impala has the 4T65E tranny and everytime I service it, or one like it, that thermo spring decides to fly out when you remove the filter. Would someone have a...
  8. C

    GM tps pressure sensors

    Please fill out the following to ask a question. MAKE:chev MODEL:Impala YEAR:2010 MILES:53000 ENGINE:3.5 DESCRIBE ISSUE....My Impala is going on 8 years old and I have a new set of Michelins to have installed next week and wonder if I should replace the tps sensors completely, not just a...
  9. C

    Ignition key springs back to off postion??

    We'll call this one 'fixed'! It was a faulty ignition switch. Back on the road again, the relearning took a bit longer than it should but the car finally accepted it. thanks for all the help and comments.
  10. C

    2017 Ram 2500HD Oil

    What type/brand oil and fuel filters do you use?
  11. C

    2017 Ram 2500HD Oil

    the dealer charged 400 for the job? WOW!!
  12. C

    2017 Ram 2500HD Oil

    thats maybe why the manual recommends it. thanks
  13. C

    2017 Ram 2500HD Oil

    thank you I will.
  14. C

    2017 Ram 2500HD Oil

    I plan on doing the oil chg myself and save the receipts. The dealer dont know what they use so i cannot trust them they might put in 5-30 car oil. I'm going to change it at 7500 to get the break in stuff out then they say go by the monitor. I'm not comfortable with that either. 15k on a diesel...
  15. C

    2017 Ram 2500HD Oil

    the manual says use shell rotella 15-40, cummins says valvoline 15-40. thankyou
  16. C

    2017 Ram 2500HD Oil

    Please fill out the following to ask a question. MAKE:Ram MODEL:bighorn YEAR:2017 MILES:5500 ENGINE:6.7 DESCRIBE ISSUE....I've run into conflicting issues on what type of oil to use. We are always above 0 deg so cummins recommended 15-40 Valvoline premium blue. The dealer where we bought it has...
  17. C

    2007 Ram 3500 Trans Troubles

    thank you very much bp!
  18. C

    Ignition key springs back to off postion??

    thank you very much nick thats the one I'll buy. Hows the weather up there? It was 107 in the shade here yesterday and humid.
  19. C

    Ignition key springs back to off postion??

    When I did it I did the relearning procedure instructions I didnt have to go to the shop. seems like you leave the key on 15 min then off and back on twice more for 15 min and it relearns.
  20. C

    Ignition key springs back to off postion??

    thanks again nickb2, I figured that something must have gone bad the key assembly and module is only 3 years old but aftermarket. What brand would you suggest using? Should I replace the theft module along with the key assembly? thank you