2000 voyager shift solenoid

Joined
Jul 18, 2008
Messages
1
Likes
0
Points
0
#1
Hi, I have a 2000 Chrysler grand voyager 3. 3 w/ 41te @105000 mi. It went into limp mode and the check engine light came on recently. I hooked up an obdII sensor and got three codes.
P0755 shift solenoid b malfunction
P0700 transmission control system malfunction
P0700 pending

I understand that the P0700 is going off because of the P0755 in doing some reading. Am I correct that the shift solenoid b would be part of the solenoid pack? I don't see anything similar in any other searching. I do see that I should check all wire connections and battery first. Any other suggestions or thoughts and any thing to watch out for in changing the solenoid pack? Thank you, Mark.
 
Joined
Nov 14, 2006
Messages
2,079
Likes
0
Points
36
#2
When testing transmission it is best to use a transmission capable scanner.
And always clear codes after checking and see what comes back.
Always check wiring and power feeds and grounds and relays.

Yes solenoid is in solenoid Assembly.
But test and check it before replacing.

The repair flow chart for all codes can be found in a All data sub.

http://www.alldata.com/products/diy/index.html