JackC's latest activity

I understand your fear to cut wires, but since these modules are problematic and not even installed on most cars at all, if it was me I...

From what I read all over the internet, those lamp failure modules are VERY problematic. Some folks have rewired and eliminated the...

If you normally need to put the brake on prior to starting, then the switch probably does have to be in play in order to start the car.

You may have to make your own gaskets and fix or find other parts that fit from other carbs. Or find a different carb with same specs...

Yes, but the dash, accessories, etc are quite different. As you recall the engine is identical.

Bill: Clock, radio, everything works. Dan: I searched all over the internet also and found nothing. grauto: Cigar lighter works...

Hi Bill: Yes, I just went out and double checked. Being a Park Ave it has lights all over the place, sun visor mirrors, doors, etc...

I do not have 12 volts to my glove box switch and bulb. I have the owners manual and know the 2 fuse panel locations. There is NO...

I like grcauto's idea. If that does not work, ( and you are sure that is the problem) you may have to replace the entire connector assy.

An inop lic plate lamp can cause "lamp out" on some cars. Just something to check. And if there are two bulbs, both must be working.

During my career I worked for Chrysler, Ford, GM, VW, Porshe, Audi at a factory level. I have always been disapointed in all...

Good for you. But, what a pain. $400 for something that should have been there in the first place, IMHO. Then have to wait for it...

A flat used to be just that, A FLAT. You replaced it with a spare of the exact same size. Done, on your way, no problem. Now one must...