Search results

  1. A

    96 Tahoe Transfercase

    I picked up a 96 Tahoe 4X4 with no motor, trans, wiring and no engine control module or trans controller. I installed a 383 stroker motor SBC, a new 4L65E trans, MSD EFI fuel injection with compuer and MSD trans controller. Transfer case is a 243 C. I bypassed the encoder by installing SPDT...
  2. A

    96 Tahoe Transfercase

    Thank you Nick. There are two connectors on the passenger side axle tube. I did hook up a SPDT switch to the motor and was able to go from 4w high and 4w low but into 2wd. Thanks again.
  3. A

    96 Tahoe Transfercase

    nickb2, sounds like you have had some interesting experiences in your life. Thank you for the help, I think I might weld a bolt on to the shaft since I do not have the OEM PCM or controller for the transfer case. The MSD trans and FI controller will not control transfer case. What should I do...
  4. A

    96 Tahoe Transfercase

    bp0, Thank you very much, it worked!! Thanks again!
  5. A

    96 Tahoe Transfercase

    Thank you very much, I will give it a try.
  6. A

    96 Tahoe Transfercase

    Its a 243 C, Electric. Some times the 4hi and 4low lights on the selector switch will light up, but dont work. Most wiring in engine bay was removed. Thank you.
  7. A

    96 Tahoe Transfercase

    Please fill out the following to ask a question. MAKE:Chevy MODEL:Tahoe YEAR:1996 MILES: ENGINE:383 DESCRIBE ISSUE....I picked up a 96 Tahoe 4X4 with no motor, trans, wiring and no engine control module. I installed a 383 motor, 4L65E trans, MSD EFI and TCM. The RPO codes for the rear end are...