Search results

  1. G

    Facts about Brake Rotors You Should Know

    This post is a year and half old. Start a new thread on your problem.
  2. G

    Gauge cluster erratic

    Pull the cluster and solder the grounds as well as any cold solder joints.
  3. G

    abs fault

    I think you found your problem.
  4. G

    No start when turning key. No crank. Intermittent problem

    Ignition switch is easy enough to check when it happens. More than a little chance it could be the culprit.
  5. G

    P1698 No CCD Bus Messages Received, Instr Cluster Not Functioning '98 Chrysler Minivan

    That's great. I'm not surprised it worked. Seen many times these early OBDII modules are supposed to be programmed and yet they work fine as P&P.
  6. G

    P1698 No CCD Bus Messages Received, Instr Cluster Not Functioning '98 Chrysler Minivan

    Does the scan tool communicate with the BCM? J2534 is a pass-through device for programming. I'm pretty sure the new BCM will need the mileage and key to the theft module programmed in.
  7. G

    Running rough at idle and worse when pressing gas and smells of gas

    Smelling gas? The purge valve may be sticking open but that don't set the no flow code. Fuel pressure?
  8. G

    P1698 No CCD Bus Messages Received, Instr Cluster Not Functioning '98 Chrysler Minivan

    Bus problems can be difficult without some way to monitor the data lines. Did you go through the flow chart? Need a decent scan tool.
  9. G

    P1698 No CCD Bus Messages Received, Instr Cluster Not Functioning '98 Chrysler Minivan

    Do you have an oscilloscope or graphing meter?
  10. G

    P1698 No CCD Bus Messages Received, Instr Cluster Not Functioning '98 Chrysler Minivan

    How are you checking for opens and shorts? I have the info on your vehicle but I'm not sure what all you have. What do you need?
  11. G

    2000 Toyota Tundra brake line

    Go to the parts store and you can borrow or buy a flaring tool for under 20 bucks.
  12. G

    2000 Toyota Tundra brake line

    Depends on the flare. Bubble?
  13. G

    2008 chevy Tahoe LTZ DRL diag

    They are likely the same.
  14. G

    2000 honda accord V6 code p0780

    Go ahead with the fluid change. If it still has problems you'll want to get all codes and may need to look at live data.
  15. G

    Rear differential How do you disassemble?

    If that's the Eaton here's the exploded view if that helps. BTW I have the rebuild info if you need it. If it's one of the other rear ends I will have it as well.
  16. G

    2014 dodge avenger tranmission leaks

    Love that light burnt orange paint.
  17. G

    Hard start on 2004 Buick Park Ave

    If that's the vortek engine you will want 55psi min. Anything less can cause problems.
  18. G

    Hard start on 2004 Buick Park Ave

    Scan tool that displays the data while running.
  19. G

    don't look right

    I can't see it.
  20. G

    Hard start on 2004 Buick Park Ave

    You should have a gauge with hose and schrader nozzle. Find the schrader valve on the fuel rail and hook it up.