Search results

  1. C

    blend door actuator on 99 0lds Bravado not working

    Hey guys, got a chance to check out the a/c on the bravada for a little while today, wasted most of time on a jeep radiator,and a volvo strut. Any way checked and found the in car sensor that Jim told me was in roof area, ok Gus the sensor has 5 volts on circuit 1199, but on the the ccc only...
  2. C

    blend door actuator on 99 0lds Bravado not working

    NickD - I have read something about a sensor in the car that is supposed to be near the roof that reads inside temperature, but cant locate it. I did find one in the center duct that looks like a IAT sensor, but not sure if that the one they talking about or not. I posted earlier about no...
  3. C

    blend door actuator on 99 0lds Bravado not working

    brcidd - thanks for quick comeback, I have checked all the wires on acuator only have power on #5 the brown, the yellow appears to be grounded, the rest do nothing. I have previously changed the head, control unit in the dash with no help, dosent appear to be putting power out of any wire going...
  4. C

    blend door actuator on 99 0lds Bravado not working

    Can any one tell me what makes this thing work, and are the solonoid valves below dash have anything to do with makeing it activate. tks
  5. C

    blend door actuator on 99 0lds Bravado not working

    Help! Have 99 Oldsmobile bravado that has a blend door problem, all heat and no a/c. This thing has the climate control unit on it. I have replaced the center section in dash with complete unit, (knobs controlling fan,heat to air,air location. Have replaced blend door actuator motor, (but it...
  6. C

    Keep alive memory 98 Ford Tarus

    Have a 98 Ford Tarus, giveing me a fit. Every time goes to emissions, it fails due to loss of KAM-keep alive memory in PCM. There is no codes at all, but when they scan it they say readiness test not complete. When I freezframe or monitor, all is working good, but as soon as cut off ignition...
  7. C

    '00 Ply Neon won't start...

    since you have removed the cables to reset the sensors, unfortunately this cleared the codes out,so you cant have it scanned for code which would really help. I would check the (camshaft interrupter magnet) some people call a camshaft posisition sensor,which reads posisition of cam to piston...
  8. C

    02 F150 with blinking security light.

    :thx Jim & Crunch, thanks much, checked all the grounds, every thing checked out good, so contacted Ford Dealer, told them the problem, and they replied sounded like the ecm needed programing, told them this was done last week by them when they installed a remanfactured ecm. so they told me to...
  9. C

    02 F150 with blinking security light.

    Correction: it is the theft light blinking, not the security. Have contridiction on this thing some people say vats system, some say dosent mean anything, some say security system, all I know is it wont start and has steady rapid blinking theft light, and only occured after I installed a fuel...
  10. C

    02 F150 with blinking security light.

    Have 2002 F150 with 52k miles. It just shut off was taken to mechanic, they replaced pcm, and would not restart, came to me I scanned came up with P1639 vehicle id block corrupted not programed, finaly got running, lasted for two days, came back and fuel pump wasnt working, replaced fuel pump...
  11. C

    AC Problem

    Olivia: jjm 100% on all answers on this one, just wanted to drop in say that had same problem on ford about 6 months ago, acted same, found out that I had a fuse that showed good when ac was cool, but after awhile the fuse would actualy heat up and seperate but couldnt be seen where seperated...
Top