Search results

  1. I

    2004 Toyota Corolla S - Check engine light turns on when turning left, stored code P2716

    I've got a 2004 Toyota Corolla S that keeps throwing a check engine light and storing the code P2716. I know the code is for the pressue control solenoid however in my troubleshooting I've confirmed that the light and code are thrown only when making a left turn from a stop. I've flushed the...
  2. I

    2004 Chevrolet Malibu Classic intake filter housing

    Does anyone know the part number of the air intake filter housing? I was replacing the air filter and noticed that one of the sides of the top of the housing is cracked and would like to replace it. I don't think that regular parts stores like AutoZone and Oreilly's would carry the part, so I...
  3. I

    2003 Buick LeSabre Rotor Size Question

    Thanks to everyone for the great input. Right after I posted we decided to do it right and took everything apart and get the right parts installed and the pads are installed in the correct places. The car drove great and smooth, we took it for a couple of test drives around the neighborhood...
  4. I

    2003 Buick LeSabre Rotor Size Question

    They are seriously different, the ones we purchased are 10" and the ones that were supposed to be on there were 11", we just didn't notice until it was too late and we were putting the old rotors in the boxes of the new rotors and noticed that they didn't fit in there. We're probably just going...
  5. I

    2003 Buick LeSabre Rotor Size Question

    I just replaced rotors on a friend's LeSabre, after the install completed successfully we went for a test drive and the car drove great and broke smoothly without any binding. When we came back from the drive we noticed that we got brake rotors for the 15 inch wheels instead of the 16 inch...
  6. I

    1999 Ford F-150 Crank but No Start

    Sorry for the very long delay in response. I took time over one of the weekends with my father in law and checked all voltages that were easily accessible in the circuit and everything checked out okay and reported 12v. We did decide to pull the bed off (way easier than I had expected) and...
  7. I

    1999 Ford F-150 Crank but No Start

    Tonight had my fiancé cycle the key on and off while I had my ear against the tank. I was able to hear faint buzzing and a couple of times I was able to hear faint fluid sucking. Does this mean the pump is working and on it's last leg? Or does it mean that it's working and I need to look...
  8. I

    1999 Ford F-150 Crank but No Start

    Sure I have no problem using a multimeter. What do I need to check with it and will I need specific probes?
  9. I

    1999 Ford F-150 Crank but No Start

    Okay I hooked up the fuel pressure tester (I think correctly). I hooked it up to a test port on the fuel rail on the driver side of the engine. With the key on and the engine off it showed no pressure, also when I cranked the engine the needle on the gauge didn't show any pressure. The needle...
  10. I

    1999 Ford F-150 Crank but No Start

    Also checked the inertia switch and it is not tripped.
  11. I

    1999 Ford F-150 Crank but No Start

    Okay I have scanned the truck for codes and there were none. I rapped/punched the fuel tank and still no start. When I checked the relay I had my fiance sit in the truck and cycle the key as I felt and listened to the relay click on and off. Also I checked the security light and it's not on...
  12. I

    1999 Ford F-150 Crank but No Start

    Jim, I have the 4.2l V6 and the truck is 2wd. I have not checked inertia switch, where would it be located? billr, I've not replaced the pump, only the fuel pump relay. I have a multi meter but don't know what I need check with it.
  13. I

    1999 Ford F-150 Crank but No Start

    I tired a new fuel pump relay and it still had the same result. I have not tried rapping on the tank or checking the codes yet but will do that next. If rapping on the tank doesn't work what else could it be? Is there a fuel pump fuse in addition to the relay that I can check? twicelow, the...
  14. I

    1999 Ford F-150 Crank but No Start

    I have a 1999 Ford F-150 that cranks the engine but will not start. I last drove the truck home from a 18 mile trip and the truck exhibited no problems, the next morning the truck wouldn't start. I tried listening for a fuel pump priming noise but heard nothing. I thought it might be the fuel...
  15. I

    1999 Mustang Caliper slide pin problem

    Thanks for the advice, I finally got them to tighten properly by putting and open ended wrench on the slide pin to keep it from moving.
  16. I

    1999 Mustang Caliper slide pin problem

    I'm working on the front brakes and I'm trying to put things back together, the issue I am encountering is trying to tighten the caliper slide pins. When I tighten them I can get one to tighten down and stop spinning while the other gets sort of tight but keeps on spinning. I've tried...
  17. I

    2004 Taurus ACC key position malfunction

    I also checked the Accessory Fuse with a fuse tester and that is good as well. Is there anything else that I can check to try and resolve this issue?
  18. I

    2004 Taurus ACC key position malfunction

    I swapped the ACC Relay into the One Touch Window-Relay and the relay works fine since my window still works. I also put the One-Touche Window relay into the place of the ACC relay and still no power when the key is in the ACC position. What should I check next?
  19. I

    2004 Taurus ACC key position malfunction

    Would anyone know which fuse I should look for specifically to troubleshoot this further? Or is there a more logical step I should take in the process?
  20. I

    2004 Taurus 3.0 DOHC Starting Problem

    I finally got the problem fixed about a month ago on my car. Well it sort of fixed itself, one day the car just decided not to crank, so I checked the battery and the voltage was very low. I went out got a new battery and the car now cranks great and I have no dash lights staying on. I'm not...
Top