Search results

  1. paulo57509

    2003 Acura rear door lock buttons won't move

    Do you have your owner's manual for the car? Review Page 80 and see if the doors behave as described. It may help diagnose what's going on. What sticks out like a sore thumb is "....aftermarket remote start fob...." Did you program the fob or was it provided when you took possession of the...
  2. paulo57509

    2017 Tacoma FPR

    Fuel pressure specification is 44 psi - 50 psi.
  3. paulo57509

    Valve cover gasket

    Attachements from TIS. No tightening pattern for the cover. Start at the center of the cover and criss-cross.
  4. paulo57509

    Any Generac experts here?

    You might try to find a Generac distributor. Less the sales pitch, they should be a bit more responsive since they should be a bit more local.
  5. paulo57509

    2007 Ford Focus ZX3 2.0 4F27E trans concerns(long)

    This should answer your VB questions. Hopefully, you have something similar to guide you. There might be some transmission model specific differences so be sure of what you're working with. I just linked the first ATSG manual I came across at that site. The site might have others so do a...
  6. paulo57509

    Briggs Statton carburetor 299448

    I think he's looking for a Pulsajet carb. I haven't seen those since my mini-bike days. I ran B&S engines with Flojet carbs. Mechanical Governor...
  7. paulo57509

    Starting/Charging System - 94 GMC C1500

    Sorry. I thought you were referring to those cheap solar panels with alligator clips.
  8. paulo57509

    Starting/Charging System - 94 GMC C1500

    After you get it sorted, get a battery maintainer (shop around for the best price): https://www.batterymart.com/p-batteryminder-1510-12-volt-1_5-amp-charger.html This maintainer will work plugged into an extension cord as well. It comes with a 2-wire trailer type pigtail so it's convenient to...
  9. paulo57509

    2014 Mercedes-Benz CLA 250 2.0L 4cyl turbo Engine R and R

    Water and engine oil make a decent lube but it's a bit light in viscosity. :rolleyes: Years ago when I was working at a paving equipment dealership, we had an old Yale fork lift that had a flat head four in it. Head gasket leaked so much water in to the crankcase, we'd have to add water every...
  10. paulo57509

    1987 Toyota Camry -BRAKE (STOP) LIGHTS DO NOT LIGHT

    I recently pitched my factory Toyota '87 Camry service manual. Unfortunate circumstance. Again as I recollect, the junction box is either on the underside of the trunk lid (behind the lights) or on the back wall of the trunk (behind the lights). It's maybe a 2" or 3" square box. I think the...
  11. paulo57509

    Encore zero turn no spark

    You don't mean an FH641V? Maybe this might help: https://www.manualslib.com/products/Kawasaki-Fh641v-2609113.html
  12. paulo57509

    S10 Fuel pressure problem

    My '03 Safari has a similar system (CSFI) that's sequential instead of "fire all at once" like the one you have. The CxFI systems are known for leaking. I would see if a leak-down test shows anything. Connect the fuel pressure gauge. Do a few key-on-engine-off cycles to get max pressure and...
  13. paulo57509

    6L80E

    When you were tearing down the transmission, where (visually) was the evidence of the slipping?
  14. paulo57509

    1987 Toyota Camry -BRAKE (STOP) LIGHTS DO NOT LIGHT

    FWIW... I had an '87 Camry years ago. It also had a brake light problem. IIRC, no brake lights and no brake lamp failure warning light. There is a plastic junction box/block inside the trunk (either on the back wall of the trunk or lid) where I found a loose ring terminal under a screw...
  15. paulo57509

    Degreaser for clothes

    I never understood how some significant others put up with allowing the cleaning engine parts in their dishwashers.
  16. paulo57509

    Degreaser for clothes

    I once had ball point pen leak onto my only dress shirt. I thought what the heck, it's ruined any way; sprayed it with Berryman B-12 Chemtool. However, I can't imaging trying to stay upright after spraying a huge, red stain and breathing that large amount of Chemtool.
  17. paulo57509

    Hot wire MAF sensor?

    Never mind....it's a hot wire. Some early Lexus used the KV type MAF sensor.
  18. paulo57509

    Hot wire MAF sensor?

    Please confirm for me - I'm pretty sure this is a hot wire type MAF sensor. '98 Lexus LS400. I don't have driveabilty issues, DTC's. Just for future reference. It's hard to see inside without removing it from the duct work (I don't want to intruduce the potential for air leaks). Hopefully...
Top