Search results

Put a vacuum gauge on it and got 19 in. gonna try the Rislone....Jim

thanks Nick...I appreciate what you said....Yeah,71 and I still work on cars almost every day...I guess till I die...lol...thanks everybody for your input...I did replace the vvt solenoid and the p0016 is still there....Jim

Hey guys....I have 2003 toyota camry,2.4 I am working on that keeps throwing a POO16. When I google it seems like it is a problem with a loose timing chain or jumped a tooth. Alldata says it is a cam and crank sensor correlation.I haven't tried replacing either one.I pulled the valve cover and...

It is a 15 amp fuse in the passenger compartment fuse box...#16...Jim

So I guess it was a pressure switch that goes in the accumulator that was sticking..That's what he said....anyway it is fixed and working again...Thanks guys....Jim

ok...thanks guys I'll try some of this and let you know....Jim

hey guys...This is on my van. I don't do ac, so I am not sure what is wrong.It is a 1996 Chevy conversion van, 5.7..It will be working fine and then it starts blowing warm air.Sometimes after awhile it will start getting cool again but sometimes it won't till the next day. I had the ac fixed...

Thanks guys...I will let you know...Jim...yeah Nick...they are a pos...I actually bought this from my neighbor for $200.00..thought I would do the timing belt and water pump and make a couple bucks...They are a real pain....I bet I never do another one...LOL.....Jim

Thanks Jack ..I will try those and the vacuum check and let you know...JIm

thanks Bill...I will check it some more...Jim

Hey guys...I have a dumb question..lol...I replaced the timing belt on a 2004 pt cruiser,non turbo.it was running fine before..just leaky water pump,changed that and the belt.now it starts right up but doesn't want to idle..if i give it a little gas it will idle fine and it runs fine just wants...

Looks like the fan shroud in the pic that is busted...Jim

Hey Bill...how about this one...Jim....

Sorry Bill..let me check some other diagrams..Jim

Another thought is the window sticking in the track...Spray some silicone down in the track real good and try it...Jim

Hey Bill I hope this helps....I have a 96 chevy conversion van...lol...Jim

I don't see anything in Alldata about a tsb for the rear...Jim

Have you checked to see if it might be a cv axle maybe the boot got ripped and the grease is gone and making it bind up...Jim

OK.....so I decided to go ahead and replace the injector on #4 and it fixed the miss....Got it back together and drove it and no miss came up....Thanks for all the help on this....Jim

Hey Nick....yeah it is coil on plug...but there are 3 wires on each coil..I pulled the coils off and put plug in the coil and turned it over...also had a plug in 3...Both of them were firing the same...Looked like they are firing ok....Jim