2000 isuzu trooper code 1275

A

a

Guest
#1
??? what is obd 2 trouble code 1275 for a 2000 isuzu trooper for???
thanx
 

Jim Davis

Hero Member
Joined
Nov 17, 2006
Messages
571
Likes
0
Points
16
Location
West Virginia
#2
What scanner did you use to get that for your trooper? I cant find that as a valid code for a 2k Isuzu Trooper. Might be wrong, been wrong before ???
 
Joined
Nov 17, 2006
Messages
4,475
Likes
6
Points
38
Location
Portland,Oregon
#3
Hey Jim.. I found one for it...it is a aps1 circuit fault.......
Circuit Description
The acceleration position (AP) sensor circuit provides a voltage signal relative to acceleration pedal angle.

The acceleration pedal angle (AP1) will vary about 13% at Idle position to about 87% at wide open throttle (WOT).

This code detects a continuous short to ground or high in either the circuit or the sensor.

Conditions for setting the DTC


The Ignition is "ON".
The acceleration pedal angle is less than 2.5% or more than 97% for 12 counts within 500 test samples (15.6 msec ).
Jim