98 subaru forester 2.5

nievla

Jr. Member
Joined
Nov 24, 2008
Messages
42
Points
0
98 subaru forester 2.5 this car will not start when it is cold have lots of trouble it run fine after it gets warm the codes i am getting are p1100, p1101, p1120, p1121, is this the air control valve or the map sensor im getting codes for both does anyone know what could be the problem any ideas are welcome thank u .
 

Jim Fairbanks

wrench
Joined
Nov 17, 2006
Messages
4,508
Points
38
Location
Portland,Oregon
Those are starter switch circuit codes....Is it automatic or manual tranny?...when it won't start, does it turn over and not start, or does it make any sound at all?.....Jim
 

nievla

Jr. Member
Joined
Nov 24, 2008
Messages
42
Points
0
it turns over but spits and sputters to start until it gets hot then it will start right up
 

Jim Fairbanks

wrench
Joined
Nov 17, 2006
Messages
4,508
Points
38
Location
Portland,Oregon
Have you tried resetting the codes and see if they come back?...Try checking the coolant temp sensor....Jim

[attachment lost in server move]
 

nievla

Jr. Member
Joined
Nov 24, 2008
Messages
42
Points
0
yes I did reset the codes and they combak but I am not geting temperature sensor codes
 
Top