Front p/s pulley shaft seal leaking

[Alexander Villanueva]

Make

Hyundai

Model

Tuscon. Gls 2wd

Year

2006

Miles

164 k

Engine

2.7

2006 Hyundai Tuscon gls 2.7l 164k miles

My serpentine belt shredded. Managed to wrap around power steering pump pulley and torn front p/s pulley shaft seal.

The pulley itself has no lip to grab where puller could affix to pull off it's shaft.
The front view of pulley shaft has a 10mm Allen that could insert about maybe 5mm.
I need to know how to remove the pulley???.
So I could insert new seal.

Thank you.

 

[billr]

"The front view of pulley shaft has a 10mm Allen that could insert about maybe 5mm."

That makes no sense to me. Post a picture.

 

[grcauto]

You will likely need to use a pump pulley puller.

https://www.amazon.com/Alltrade-648605-Steering-Alternator-Installation/dp/B0028QGTWM

 

[Alexander Villanueva]

Sorry gr and bill. My phone camera sucks in imaging. However, in the kit you Showed. I believe won't work. I had pulled many pulleys. But want to be safe than sorry. Again, I'm able to place a 10 mm external hex head torx or Allen socket. 90° L type Allen key because of its internal hexagonal shape insert at front face of shaft which if you were facing front of engine and cannot grab the pulley via the shaft as if it were like the Chevy,ford,dodge pulleys. The internal part of shaft at front as if we're sticking your finger in hole would only go in 5mm. I'll attempt to take picture .