Search results

Came back last November this is my sons spare truck. Last year cold weather random stalls at idle, check engine light on, bank 2 O2 lean. Lived with it as no cash. Spring time took to shop ended up replacing both cats and all 4 O2 as inspection was due. Passed inspection after driving for a...

code 10941 WEL Actuator Motor Relay Circuit Help no clue what this means or where it is located to start have a VOM and a code reader only. Thanks

Please fill out the following to ask a question. MAKE:Eord MODEL:Escape YEAR:2001 MILES:83K ENGINE:2.0 4 CYL DESCRIBE ISSUE....LOOKING FOR OPINIONS ON THIS CAR. DAUGHTER LOOKING AT IT BUT DO NOT KNOW HISTORY OR COMMON PROBLEMS ON THESE CARS. THANKS

Please fill out the following to ask a question. MAKE:suzukt MODEL:forenza YEAR:2006 MILES:130K ENGINE:2.0 DESCRIBE ISSUE.... Car throws this code cat efficency low Replaced cat and O2 Drove 2 days and code came back Any ideas or suggestions? No scanner to monitor O2 activiy

Please fill out the following to ask a question. MAKE:chevy MODEL:3500 cutaway YEAR:2010 MILES:150K ENGINE:6.0 gas DESCRIBE ISSUE....AC dual ac conversion expansion valve on the rear ac but cannot find the orifice tube location for the front evap. Can anyone tell me where it is located? Thanks...

Please fill out the following to ask a question. MAKE:chevy MODEL:3500 van YEAR:2009 MILES:143K ENGINE:6.0 gas DESCRIBE ISSUE....Replaced alternator and battery and checked all connections code keeps coming back. Any suggestions

Just bought this car for my daughter to learn to drive on. Decent car for a beater but there is a harsh 1/2 shift all other shifts are smooth as silk. Shifts even harder as you accelerate harder. No codes at all. Any ideas or just let it be? Not a transman at all!!

Friend has a mid 2000 dodge car. He said it had a bad ECM and went out and got a junkyard unit. Car starts and runs fine but no dash gauges. I have seen this on Fords with digital versus analog gauges. Can the Dodge ECM's be reflashed to correct this? Thanks

None of the blower controls work. Checked all fuses and relays also replaced the entire dash head. Same Blower works on all speeds, but only blows out of the dash vents. Any help appreciated.

Anyone can post a wiring schematic for the IDM circuit. No injector buzz on any cylinders. Van just died on the road with no start. Relay to power the IDM does not energize. Thanks

Can anyone help with specs and procedures for adjusting the valves on the C7 and the 3126 engines? Thanks

Does anyone have a schematic for the wiring for the fan clutch? Clutch engages during initial start self test but never comes on even when engine temps hit 215 degrees. Thanks

Need some help. Bus has a warning light called Trac Control. Can anyone explain its function and how to diagnose problems when light is flashing versus when it is on all the time? Thanks for any help

I had to replace the intake gasket as it was weeping antifreeze, I need to know the process to reinstall dist. One tab broke off so I am installing a new dist. Thanks

Anyone know a good aftermarket supplier for their parts over the net. I am in Central America and they flood the market here with their "reconditioned" saws but cannot get parts for the junkers. I need piston, rings and cylinder for mine and have lots of friends who cannot get their parts...